Project

General

Profile

How to Transaction Management » History » Revision 14

Revision 13 (Henning Blohm, 17.09.2012 15:03) → Revision 14/29 (Henning Blohm, 17.09.2012 15:15)

h1. Transaction management in Z2 

 (work in progress) 

 This page provides some hints and pointers on how to implement transaction management for modular applications on Z2. There are a few utilities provided with Z2 that may help you implement transaction handling for the simple cases, and this site provides examples that show how to address the more complicated cases. 

 Everything below is describing use and enabling of a Java Transaction API ("JTA":http://de.wikipedia.org/wiki/Java_Transaction_API) based approach to transaction management.  

 Note that there is nothing in Z2 that prevents you from using a previously implemented Web application-local based transaction management. The information on this page is most useful, if you have a modular application that requires transaction management also on a service level. 

 The following aspects will be discussed: 

 * The built-in, non-XA JTA implementation of Z2 
 * Controlling transactions in code 
 * Using Datasource components 
 * Using Hibernate JPA 
 * Using a full-blown transaction manager 
 * Integration with Jetty 
 * Integration with Spring 

 h2. The built-in, non-XA JTA implementation of Z2 (com.zfabrik.jta) 

 The "z2-base.base":http://redmine.z2-environment.net/projects/z2-base/repository/base repository contains the JTA 1.1 API and an implementation of it in the module *com.zfabrik.jta*.  

 *Note*: This is not an XA-capable transaction manager. This implementation provides no atomic transaction control for more than one transactional resource! 

 But, this implementation is still most useful, if you do not need distributed transactions (which is preferable in most cases) and still want to benefit from the JTA API as an integration point. 

 Technically the implementation relies on Z2's _Unit of Work_ abstraction (see "Unit of Work and transaction management":http://www.z2-environment.eu/v21doc#Unit%20of%20Work%20and%20transaction%20management). As long as all interactions with an application are issued from a Web application this is completely transparent. When invoking code from other entry points, e.g. from an embedded scheduling service for example, this has an impact that will be discussed below. 

 The "TransactionManager":http://docs.oracle.com/javaee/6/api/javax/transaction/TransactionManager.html interface, as well as the "UserTransaction":http://docs.oracle.com/javaee/6/api/javax/transaction/UserTransaction.html interface are available from the component *com.zfabrik.jta/userTransaction* and can be looked up via the Z2 core API 

 <pre><code class="java">IComponentsLookup.INSTANCE.lookup("com.zfabrik.jta/userTransaction",TransactionManager.class)</code></pre> 

 or via JNDI as 

 <pre><code class="java">new InitialContext().lookup("components:com.zfabrik.jta/userTransaction?type=javax.transaction.TransactionManager")</code></pre> 

 and similarly for the UserTransaction interface. 

 This simple approach to JTA has been used in the samples [[Sample-hibernate-basic-TBD]] and [[Sample-spring-hibernate-TBD]]. 

 h2. Controlling transactions in code 

 Now that you have a JTA implementation you need to indicate where transactions start and end. The most basic (and most understandable) approach to that is to use the UserTransaction interface. Typically in a flow like this: 

 <pre><code class="java"> 
 UserTransaction ut = (UserTransaction) new InitialContext().lookup( JNDI_NAME ); 
 ut.begin(); 
 try { 
   // do some work 
 } catch (Exception e) { 
   logger.log(Level.WARNING,"Error at transaction boundary. Setting transaction to rollbackonly",e); 
   ut.setRollbackOnly(); 
   throw e; 
 } finally { 
   if (ut.getStatus()==Status.STATUS_ACTIVE) { 
     ut.commit(); 
   } else { 
     ut.rollback(); 
   } 
 } 
 </code></pre> 

 The constant *JNDI_NAME* is intentionally left undefined here. If you use *com.zfabrik.jta* you may use the name specified above. If the code above is part of a Servlet Filter that is supposed to begin and end transactions on the boundaries of a Web request, you can use the standard name "java:comp/UserTransaction" given you integrated the transaction management with Jetty (see below). 

 Now that we looked at it, fortunately you do not need to implement this yourself. Here are some alternatives: 

 * Use "TransactionUtil":http://redmine.z2-environment.net/projects/z2-base/repository/base/revisions/master/entry/com.zfabrik.jta/java/src.api/com/zfabrik/tx/TransactionUtil.java from *com.zfabrik.jta* that implements just the flow above. 
 * Use Spring's transaction management support including annotation based transaction demarcation, as for example in [[Sample-spring-hibernate-TBD]] and [[Sample-jta-spring]] (see also [[How to Spring]]). 
 * Use any of the many "Transaction Filter" implementations out there. 

 h2. Using DataSource components 

 A JDBC data source wraps JDBC connections, i.e. actual database connections, for re-use along the control flow.  

 When accessing the same database multiple times within one transaction, you want to make sure you re-use the same (underlying) JDBC connection. That is, you may (typically) not have more than one (underlying) JDBC connection to the very same database that share the same (non-distributed) transaction. Hence the typical implementation associates a JDBC connection to a database with the transaction that is associated with the current thread of execution. Obviously there is a strong tie between the management of database connections and the transaction management system. JDBC data sources provide the accessor interface to database connections. You may hold of to a data source and ask it for a connection when needed, but you should not hold on to the actual connection object between invocations of your service interface.  

 Z2 offers a built-in DataSource component type. This is useful, if you use *com.zfabrik.jta*. If you use another transaction management system, you should most likely use another data source implementation. See for example [[Sample-jta-plain]]. 

 When using the built-in data source, you can look up the "DataSource":http://docs.oracle.com/javase/6/docs/api/javax/sql/DataSource.html interface via a component lookup, e.g. via JNDI like this: 

 <pre><code class="java">(DataSource) new InitialContext().lookup(COMPONENT_NAME?type=javax.sql.DataSource)</code></pre> 

 where *COMPONENT_NAME* has to be substituted by the real name of the data source component. 

 The built-in data sources have been used for example in [[Sample-hibernate-basic-TBD]] and [[Sample-spring-hibernate-TBD]]. 


 h2. Using Hibernate and JPA 

 Now you have a JTA implementation in place as well as data sources defined, assuming you want to use the "Java Persistence API":http://de.wikipedia.org/wiki/Java_Persistence_API you buy into yet another layer that needs to be integrated with the transaction management system.  

 In JPA, the equivalent of a data base connection is the "EntityManager":http://docs.oracle.com/javaee/6/api/javax/persistence/EntityManager.html interface. And as with connections and data sources, you will want to reuse the entity manager instance across invocations within one transaction. An entity manager is created from an "EntityManagerFactory":http://docs.oracle.com/javaee/6/api/javax/persistence/EntityManagerFactory.html given a definition of a _Persistence Unit_. We cannot go into all the details here.  

 In Java EE environments, you may delegate the creation of entity managers to the container and have it _injected_ into your code using a corresponding annotation. The same comfort (and beyond that) can be achieved in Z2 even across modules using the Spring framework (see for example [[Sample-spring-hibernate-TBD]] and [[Sample-jta-spring]]).  

 The underlying implementation however is always about associating an entity manager with the ongoing transaction. If you do not want to use Spring or want to fully understand the principle mechanics, you may use the "EntityManagerUtil":http://redmine.z2-environment.net/projects/z2-base/repository/base/revisions/master/entry/org.hibernate/java/src.api/com/zfabrik/hibernate/EntityManagerUtil.java of the module *org.hibernate* in *z2-base.base". This is how it is done in [[Sample-hibernate-basic]]. 

 To connect a persistence unit (and hence the entity manager factory) with the transaction management and the data source to use, you add corresponding information to the file "META-INF/persistence.xml":http://redmine.z2-environment.net/projects/z2-samples/repository/revisions/master/entry/com.zfabrik.samples.hibernate-basic.domain/java/src.impl/META-INF/persistence.xml of your domain module. For example, the one in [[Sample-hibernate-basic]] looks like this: 

 <pre><code class="xml"> 
 <persistence xmlns="http://java.sun.com/xml/ns/persistence" version="1.0"> 
    <persistence-unit name="thingies" transaction-type="JTA"> 
       <provider>org.hibernate.ejb.HibernatePersistence</provider> 
       <jta-data-source>components:com.zfabrik.samples.hibernate-basic.domain/DB</jta-data-source> 
       <class>com.zfabrik.samples.hibernate_basic.thingies.Thingy</class> 
       <exclude-unlisted-classes>true</exclude-unlisted-classes> 
       <properties> 
          <property name="hibernate.dialect" value="org.hibernate.dialect.MySQLDialect" /> 
          <property name="hibernate.hbm2ddl.auto" value="update" /> 
          <property name="hibernate.jdbc.batch_size" value="10" /> 
          <property name="hibernate.cache.use_second_level_cache" value="false" /> 
          <property name="hibernate.transaction.manager_lookup_class" value="com.zfabrik.hibernate.TransactionManagerLookup" /> 
        </properties> 
   </persistence-unit> 
 </persistence> 
 </code></pre> 

 The noteworthy pieces are  

 # The <jta-data-source/> definition that uses a DataSource JNDI name as discussed above. 
 # The <property name="hibernate.transaction.manager_lookup_class"/> declaration 

 The latter is required for Hibernate to find the transaction manager instance. Unfortunately Hibernate does not support a JNDI name for that. That's why the module *org.hibernate* provides an implementation you can use (it's really simple. See "TransactionManagerLookup":http://redmine.z2-environment.net/projects/z2-base/repository/base/revisions/master/entry/org.hibernate/java/src.api/com/zfabrik/hibernate/TransactionManagerLookup.java). 

 When not using *com.zfabrik.jta*, the value to specify differ of course. See also [[Samples-jta-plain]]. 

 h2. Using a full-blown 


 There is various ways  



  What data source 

 








 If you have implemented transaction manager 

 The sample [[Samples-jta-plain]] and [[Samples-jta-spring]] illustrate how management locally to integrate the Atomikos transaction manager in a hand-wired Web application already using Hibernate Sessions or in a the simple transaction management provided by the Spring configured way resp. While it does help framework and you do not intent to understand the contents of have other entry points to your application scenario you may skip this page, further details are to be found page. 


 (work in the explanations of the samples. 

 h2. progress) 



 Alternatives - mini JTA, full JTA. 
 Integration with Jetty points: Jetty, Hibernate, Spring 

 The Jetty Web Container that comes with Z2 can be configured Explain transaction util. 

 ------------ 


 This Wiki is about how to integrate with a full-blown transaction manager (see e.g. "Jetty JNDI":http://docs.codehaus.org/display/JETTY/JNDI). The most notable impact is into Z2. We only consider Atomikos for now, hoping other TMs can be used similarly. 

 Note that you can use the JNDI name "java:comp/UserTransaction" to retrieve z2-base.base repository contains the UserTransaction interface from within JTA 1.1 API and an implementation of it in the Web application. Note: This lookup module *com.zfabrik.jta*. That is valid as long as the current thread's context class loader however not a real, full-featured transaction manager - rather just a pseudo-distributed transaction management implementation. There is the class loader of the Web application. Practically speaking this means it no 2-phase-commit handling.  

 It is safe to rely on this name while within the code of the Web application. When switching threads or invoking modules that still extremely useful for 90% case where global, distributed transactions are unnecessary overkill.  

 At times however, you may for some reason switch the context class loader or when invoked from another entry point require a real TM and even if you dont and want to your application this may not be the case. 

 When using use Atomikos with non-XA data sources, in which case it behaves similarly to *com.zfabrik.jta*, having  

 <pre><code class="xml"> 
   <New id="tx" class="org.eclipse.jetty.plus.jndi.Transaction"> 
     <Arg> 
       <New class="com.zfabrik.tx.UserTransaction"/> 
     </Arg> 
   </New> 
 </code></pre> here is how it's done. 

 in *environment/webServer/jetty.xml* does the trick. In other setups There are two samples related to this varies. Please check the JTA samples mentioned above for an example of another configuration. page: 

 h2. Integration * *z2-samples.jta-plain*: A sample scenario with Spring 

 Integration with Spring just z2-base and Atomikos and no further trickery. This samples explains best what is yet another subject needed to get going. See also [[Sample_jta_plain]]. 
 * *z2-samples.jta-spring*: A sample scenario built on its own. Please see z2-base, z2-addons.spring, and Atomikos. This is the details on [[Samples-spring-hibernate-TBD]] for more advanced, Spring-minded case. The underlying mechanics may be harder to grasp though. See also [[samples_jta_spring]]. 

 Please consult [[How_to_Run_a_Sample]] on that. how to run these samples. 

 h2. Summary References 

 It is not as complex as it sounds. This page intentionally goes into some depths to give an understanding on a subject that often is ignored until failing, which is exactly when it is late to understand and correct assumptions. It will be best to pick one of the samples that best fits to your situation and take it from there. 


 * [[How_to_Run_a_Sample]] 
 * [[How_to_Spring]]