How to Run a Sample¶

Various z2-based sample system configurations have been prepared as Git repositories.

Assuming you know the repository URL these three steps (with or without Eclipse) are all there is to do:

Eclipse users¶

Most likely you also want to look at code or configuration files of an example. That is why we recommend to start from within the Eclipse IDE. If you prefer the command line or another IDE, please proceed to #cmd.

From the Command Line
<a name="cmd"/>¶

0. Pre-Requisites¶

All you need is Java Runtime Environment (JRE) of at least version 6. Preferrably, as that is easier to understand a sample, have the Eclipse IDE installed.
Other pre-requisites, for example some database setup may be required based on the specific example, i.e. stuff that cannot be covered here.

1. Prepare a z2-base Installation¶

Create a folder to hold the installation. We will assume that folder is called sample

In sample execute

git clone -b master http://git.z2-environment.net/z2-base.core

Go into sample/z2-base.core/run/bin and run

./gui.sh

or

gui.bat

depending on your operating system. A simple graphical console should open up that displays the console log output of the z2 <home> and worker processes - as explained in http://www.z2-environment.eu/check_it_out.

At the first start, the environment will download required resources, which may take a few minutes - depending on your network bandwidth. Subsequent starts will be faster.
Eventually the server should be up and you can go to the basic admin view at http://localhost:8080/adm (use z* with password z) to verify everything is cool.

Stop the environment again by either pressing Ctrl+C on the console where you started the GUI or by clicking the Exit button on the GUI.

2. Clone the specific sample repository¶

Given the sample repository is called z2-samples.sampleX, go into sample once more and run

git clone -b master http://git.z2-environment.net/z2-samples.sampleX

Now start the environment as described above. The environment will now run with the sample configuration and all required dependencies.

In other words: That's it.

Why does that actually work¶

If you care, here is how everything falls into place:

The z2-base.core repository contains a z2 core installation that is bound to a remote "system repository" at http://git.z2-environment.net/z2-base.base. As it is by now best practice with z2, that repository contains an environment module that describes system specific settings such as other repositories.

By cloning the sample repository you put an override of environment module into view of the dev repository. That is, the local server will take your local definitions with preference over the remote definitions. These may include other remote component repositories such as z2-addons.spring.

In addition the sample repository contains all the modules holding code and other resources that implement the actual sample.

If you already understand how the dev repository works, you will not be surprised to find files called LOCAL in the module folders of cloned repository's workspace.

References¶

• Dev Repository: http://www.z2-environment.eu/v20doc#Workspace%20Development%20Using%20the%20Dev%20Repository